Contact Us: +91 99877 59447
Air Oil Lubrication Systems are ideal for locations requiring precise delivery of oil. Following is a list of principles that have guided Shaan Lube in the development of Air Oil Lubrication Systems for rolling mills
The afore listed principles have led Shaan Lube in association with Nortek SA of Spain, global leaders in Air Oil Lubrication Systems, to plan three systems for rolling mills-
Single Line system is suitable for installation where the oil has a viscosity of less than 1500 CST. This system is suitable for every quick bearing and it can easily be extended, there is no expansion limit. This system is the most economical.
Progressive system is suitable for installation with few lubricating points and which must not be modified. Any oil viscosity can be pumped, and a physical control of the injection can be made.
Double Line + Air/Oil Progressive system is the most suitable for complete installation of wire, profile, plate mills, etc. It has certain advantages like – no extension limit, only one pumping group, no limit to the oil viscosity to be lubricated, provision for physical control of the injection and has dividers (special instruments, developed to distribute the oil in large-sized riders), normally used in plate mills, where oil has to be distributed from one inlet to several lubrication points of chock (axials, two radials, retainer).
Shaan Lube in India’s largest manufacturer of Centralized Oil Lubrication Systems. In fact, the largest Oil Lubrication Systems in India have been manufactured and supplied by Shaan Lube. From
Today paper machines are designed to run at faster speeds, under heavier loads & at higher operating temperatures. In addition to afore mentioned conditions, the machines are also subjected